NORLYS

NORLYS Narvik II 1850GR LED bollard light 3000 K, satin diffuser, graphite RAL 7016, 95 cm

Name: NORLYS Narvik II 1850GR LED bollard light 3000 K, satin diffuser, graphite RAL 7016, 95 cm
Brand: NORLYS

NORLYS Narvik II 1850GR is a 95 cm bollard light with a domed cap sheltering a satin diffuser. The body is cast aluminium, powder-coated in graphite (RAL 7016), and the shaft has an inspection door that gives access to the terminals and the driver.How much light it gives and where it goesThe fitting has an integrated LED module at 3000 K, a warm white that looks calmer on a path or against a facade than neutral light. It delivers 1122 lm from 22.2 W. The module itself produces 3017 lm, but the cap and diffuser deliberately hold part of it back — 1122 lm is the figure to compare against other bollards.Light leaves on four sides and is shielded from above, so it falls on the ground and the area around the bollard rather than into the sky. The satin diffuser spreads the LED point, so passers-by do not look straight into the diodes. The fitting is not dimmable: it is switched by a switch, a timer or a dusk sensor, with no brightness control.Where it belongsNorlys designs Narvik II for private grounds and public spaces. It suits a garden path, a terrace, a driveway, a park, a residential street and the grounds of a hotel or restaurant. The base takes up 24 × 24 cm — compare that with the width of the walkway so the bollard does not narrow it.IP65 means a dust-tight housing protected against water jets, so the fitting stands outdoors without any cover. IK10 is the highest impact rating on that scale, which matters along footpaths and parking spaces where a bollard is exposed to accidental knocks.Installation and serviceThe fitting is bolted down through six oval 10 × 15 mm holes set at 60° intervals on a 172 mm circle. The concrete anchor and mounting adapters are sold separately, so choose them for the ground before installation. The terminals take conductors up to 2 × 4 mm² and allow the supply to be looped on to the next bollard, and the gland accepts round cable of 8–12 mm or 10–14 mm diameter. Connection is a job for an electrician.The LED module and driver are not sealed into the housing: Norlys provides for their replacement by a service technician and offers the service kit ZS1850zx0009. The module keeps 80% of its output for more than 102,000 hours, and the driver is rated at 50,000 hours. The fitting weighs 10.84 kg net.Mostrar mais

desde 1256,64 €

1 oferta

↑ Melhor preço subiu 39% nos últimos 30 dias

Ver ofertas