NORLYS

Norlys Halmstad 1488GA bollard light, hot-dip galvanised steel, 49 cm, LED E27 5.9 W 2700 K included, IP65

Name: Norlys Halmstad 1488GA bollard light, hot-dip galvanised steel, 49 cm, LED E27 5.9 W 2700 K included, IP65
Brand: NORLYS

Halmstad 1488GA is a low, square-section bollard made of hot-dip galvanised steel — unpainted, with a matt silver zinc coating. The head is an opal PMMA diffuser surrounded by horizontal louvres and partly shielded from above by a cap. Dimensions and installation The bollard is 49 cm tall with a 12 × 12 cm section and weighs 7.88 kg. That height marks the edge of a path or driveway without hiding the planting. It is fixed with three bolts through ø9 mm holes set 120° apart on a ø65 mm circle. Ground-fixing parts are not included. Norlys sells separately the concrete-in anchor 205, the ground anchor 206, the concrete-foundation adapter 206S and the mounting adapters 3080GA and 3086 — one of them has to be added to the order. The terminals take conductors up to 3 × 2.5 mm², including loop-through, on a cable up to 12.5 mm in diameter, so several bollards along a path run on one line. Light source and brightness A dimmable Philips LED lamp with an E27 base, 5.9 W and 2700 K is included — warm, slightly yellow light. The lamp produces 806 lm, and 252 lm come out through the opal diffuser and louvres — enough to mark a path, not to light the whole garden. The lamp is replaced by the user; the fitting takes A55–A60 shaped lamps. Part of the light (ULOR 48%) goes upwards, so the bollard reads as a bright body from a distance. The fitting can be dimmed with a trailing-edge or leading-edge phase dimmer. Build Hot-dip galvanised steel, IP65 and the top IK10 impact rating let the bollard stand by a driveway or in a public area where knocks are likely. Protection class II means double insulation with no earth conductor. The diffuser and gasket are available as spare parts.Meer tonen

vanaf € 387,00

1 aanbieding

Bekijk aanbiedingen