Lumines

LED profile LUMINES type inDileda white lacquered 1 m

Name: LED profile LUMINES type inDileda white lacquered 1 m
Brand: Lumines

The white lacquered RAL9016 LUMINES inDILEDA LED profile is supplied in a 1 m length and is intended for recessed installation in plasterboard ceilings or walls. Variant code 10-0201-10 distinguishes this version from the black and silver finishes and from longer sections in the same range. The profile is fitted into a prepared routed opening, so the planned recess should be checked against the installation cross-section before ordering.inDILEDA system for two LED stripsThe construction is designed to accommodate two LED strips. It forms the basis for a custom linear luminaire or a continuous lighting layout with a chosen route. The manufacturer provides dedicated connectors for joining profiles; connectors should therefore be selected separately when a longer line is planned. The power supply is located outside the profile.Installation and compatible componentsThe profile can be pressed into a prepared opening; the manufacturer also lists spring, screw and double-sided-tape installation techniques. DOUBLE diffusers are available for inDILEDA, including an optional louvred diffuser intended to reduce glare. The diffuser, LED strips, end caps, connectors and fixing components are system items to be selected for the project. The light direction is perpendicular to the mounting surface.Planning the recessed lineThis variant is 1 m long, while other lengths are available within the system. The manufacturer identifies the profile as a basis for decorative or general lighting, depending on the selected LED strips and other components. It is not intended for drive-over installations. A complete configuration may be sealed to IP68 or unsealed to IP20; the profile alone does not determine the protection rating of the finished installation.Meer tonen

vanaf € 21,87

1 aanbieding

Bekijk aanbiedingen

Beste prijs de laatste 30 dagen met 25% gestegen