Lumines

LED PRO G 4PIN Connector for 10 mm RGB/CCT LED Strips, Double-Ended (Strip to Strip)

Name: LED PRO G 4PIN Connector for 10 mm RGB/CCT LED Strips, Double-Ended (Strip to Strip)
Brand: Lumines

The LED PRO G connector from LED Labs' PRO series joins two lengths of 10 mm, 4PIN RGB/CCT LED strip end to end — strip to strip, with no wire between them. It has a transparent polycarbonate housing and copper contacts, and measures 22 × 14 × 7 mm. How the connection works Each strip end slides into the connector and the cover clicks shut. The pins pierce the strip's PCB, so no soldering or stripping is needed. Before buying, check that both strips are 10 mm wide and have four solder pads at the end — strips of another width or pin count take other connectors from the same series. Power and sealing The connector works in 5, 12 and 24 V DC installations, and the manufacturer specifies a maximum current of 2 A. That limits the power passing through one joint: about 24 W at 12 V and about 48 W at 24 V — worth calculating when a longer section is fed through the connector. It can be used with IP20 and IP65 strips, but with an IP65 strip the joint itself must be sealed to keep that rating. The connector opener (index 24-0000-73) is a separate product and is not included.Mostra di più

da 0,54 €

1 offerta

Vedi le offerte