Asker 1313GB LED Bollard Light, beige grey, NORLYS
NORLYS

Asker 1313GB LED Bollard Light, beige grey, NORLYS

Asker 1313GB is an 85 cm bollard light in powder-painted cast aluminium, finished in beige grey. The light leaves through a structured clear polycarbonate bowl, UV-stabilised, set into the upper part of the body. Size and anchoring into the ground The fitting measures 85 × 20 × 11 cm and weighs 4.01 kg. At that height the light falls from knee level, so the bollard lights the path surface rather than the face of whoever is walking along it — the basic difference from a lantern on a taller post. The base bolts down through four ø8 mm holes spaced 18 × 50 mm. The maker states outright that the mounting accessories are bought separately: concreting anchor 1907ZX0009, ground anchor 1908GA0009, adapter for a concrete foundation 1909GA0010, and adapters 3081XX0009 and 3090GA0009. Without one of them there is nothing for the bollard to fix to. The terminals take conductors up to 3 × 2.4 mm², and looping through to the next fitting up to 3 × 4 mm². A row of these along a driveway therefore runs off one supply line rather than a separate cable to each. The gland accepts round cable of ø4–8, ø8–12 or ø10–13.6 mm. The light it gives The built-in LED module draws 7.2 W and delivers 543 lm out of the fitting, at 2700 K — warm, slightly yellow, close to a traditional incandescent. A colour rendering index of Ra 80 is enough for finding your way outdoors. The output is aimed downwards: upward light output is 0.6% and the BUG rating B0-U1-G0 confirms the fitting throws virtually nothing at the sky or into a neighbour's windows. The source is not user-changeable — the manufacturer lists the LED module and the driver as service parts ZS4699101113 and ZS46999746. The fitting dims, but only on a trailing-edge dimmer (RC type). An older leading-edge R or RL dimmer will not drive it. Build and life outdoors Ingress protection IP65 means fully dust-tight and resistant to water jets, so the bollard can stand in the open. Impact resistance IK10 is the top of that scale — the housing is rated for a blow, which matters practically on a fitting standing at mower height. The body is sealed with a silicone gasket and an EPDM cable gland. The fitting is protection class I, so a protective earth conductor has to reach the terminals as well.Mostra di più
da 261,50 €
1 offerta
Vedi le offerte

Offerta

Lunares.eu
Disponibile · Spedizione: 12,50 €*Spedizione da 🇵🇹 PT → 🇮🇹
261,50 €
Totale: 274,00 €
Vai al negozio

Tutti i prezzi IVA inclusa; spese di spedizione secondo il feed del negozio. Il clic porta direttamente alla pagina prodotto del negozio.

Andamento del prezzo (prezzo minimo)

261,50 €22 set24 set27 set30 set22 set: 261,50 €30 set: 261,50 €

Dettagli del prodotto

Marche
NORLYS
GTIN
07042894435813
Categorie
Casa e giardino > Illuminazione > Luci decorative per vialetti

Prodotti simili