NORLYS

Floodlight Varberg 7151GR graphite LED 30 W 4000 K - Norlys

Name: Floodlight Varberg 7151GR graphite LED 30 W 4000 K - Norlys
Brand: NORLYS

Varberg 7151GR is an LED floodlight made of extruded aluminium profile, powder-coated in graphite RAL 7016. A sealed clear polycarbonate lens closes the front, and the body sits on a mounting bracket that lets you tilt the beam in the vertical plane. The LED module and driver are built in, so the fitting lights as soon as it is connected. What it is for and how it lights The manufacturer intends it for lighting facades, gardens and private grounds. It draws 30 W and delivers 3843 lm at 4000 K, which is neutral white. The Ledil T4-B lens gives an IESNA type IV distribution that throws light forward, away from the fitting – the manufacturer illustrates it with a floodlight standing on the ground 1.5 m from a wall and lighting the wall surface. Colour rendering is CRI 70: facade and plant colours stay recognisable, though less faithfully than under an Ra 90 source. The same series has a 3000 K version, 7150, for a facade that should get warmer light. Control and power supply The driver supports DALI2 and the NightDim function. It leaves the factory programmed to maximum current, so without a controller the fitting runs at full output; Norlys programs other settings by arrangement with its sales department. The fitting can also run on 168–275 V DC, which matters in installations fed from a central battery. The floodlight comes with an H07RN-F 5G1 cable already fitted, which is connected to the installation in a suitably chosen junction box. It is protection class I and needs a protective earth connection. Size and mounting The body measures 23 × 16 × 9 cm and weighs 1.55 kg. The bracket is fixed with two screws through ø7 mm holes 120 mm apart, to the ground, a wall or a structure. IP65 and IK10 impact resistance allow it to stay outdoors without a cover, including low near the ground where an accidental knock is easy.Show more

from 490,15 €

1 offer

See all offers