sE Electronics

sE Electronics V3 Bundle with K&M Microphone Boom Stand and 5m XLR Cable

Name: sE Electronics V3 Bundle with K&M Microphone Boom Stand and 5m XLR Cable
Brand: sE Electronics

In this bundle 1 × SE Electronics V3 Dynamic Vocal Microphone 1 × K&M 27910 Microphone Boom Stand with Folding Tripod Base (900-1600mm) 1 × W Audio 5m XLR Male - XLR Female Microphone Cable SE Electronics V3 Dynamic Vocal Microphone The sE Electronics V3 is a cardioid dynamic handheld vocal microphone built for live use. It offers a balanced vocal response, all-metal construction and an internal shockmount for low handling noise at a budget-friendly price point.Key FeaturesDynamic capsule with neodymium magnetCardioid polar patternAll-metal constructionInternal shockmount for low handling noiseInternal windscreen reduces plosivesSpring steel mesh grilleCopper voice coilStandard XLR outputSuitable for vocals, speech and instrumentsSpecificationsTypeDynamicPolar patternCardioidFrequency response50 Hz to 16 kHzSensitivity2.5 mV/Pa (-52 dBV)MagnetNeodymiumVoice coilCopperConnector3-pin XLR K&M 27910 Microphone Boom Stand with Folding Tripod Base (900-1600mm) The K&M 27910 is a lightweight, no-nonsense boom stand for vocals, speech and instrument miking. A folding tripod base with metal legs packs down small for transport, and the two-piece column adjusts from 900mm to 1600mm. The 800mm one-piece boom arm locks with a wing nut, so you can angle the mic over a guitar amp, a drum kit or a lectern without the stand tipping. It ends in a standard 3/8" thread, so it takes any mic clip directly, or 5/8" clips with an adaptor. Features Folding tripod base: plastic hub with metal legs Two-piece folding column, height 900mm to 1600mm 800mm one-piece boom arm with wing-nut clamp 3/8" threaded connector Weight 2.35kg Specifications Manufacturer code: 27910-300-55 Height: 900mm to 1600mm Boom arm length: 800mm Thread: 3/8" Colour: black Weight: 2.35kg W Audio 5m XLR Male - XLR Female Microphone Cable A W Audio 5 m balanced microphone cable terminated in a 3-pin male XLR at one end and a 3-pin female XLR at the other. A standard mic lead for stage use, studios, install work and any patching where you need to extend or connect microphones, DI boxes or other balanced line level sources.Key Features3-pin male XLR to 3-pin female XLRBalanced microphone / line cable5 m lengthSuitable for stage, studio and installSpecificationsConnector A3-pin male XLRConnector B3-pin female XLRLength5 m (approximately 16.4 ft)TypeBalanced microphone cableSKUCABL55Show more

from £81.00

1 offer

See all offers