Ampetronic

Ampetronic CLS1 Wall Mount Hearing Loop Driver, 3 Inputs, up to 200m², 3.3A RMS Loop Current

Name: Ampetronic CLS1 Wall Mount Hearing Loop Driver, 3 Inputs, up to 200m², 3.3A RMS Loop Current
Brand: Ampetronic

The Ampetronic CLS1 is a wall-mounted hearing loop driver for areas up to around 200 m², with three inputs and all wiring and controls behind a tamper-resistant hinged cover. It accepts a microphone, line-level audio and a 100V line or speaker feed, so it can take audio from an existing PA. Typical uses are meeting rooms, classrooms, community centres, churches and interview rooms. >200 m²Area coverage3.3 A RMSLoop current3Inputs5 yearsWarranty Hard-wired mainsMains connects to a screw terminal block on the chassis, not an IEC lead, so plan for fixed wiring by a qualified electrician. FeaturesWall-mount driver for loop areas over 200 m²Three independent inputs: balanced mic/line, line with expansion port, and isolated 100V line or speakerConnections and controls behind a hinged, detachable tamper-resistant coverSpeech optimised automatic gain controlMetal loss correction, 0 to 3 dB per octaveNatural convection cooling, no fan5 year Ampetronic warranty SpecificationsLoop output current>3.5 A RMS (5.0 A peak) continuous, 1 kHz sine; short-term peaks >5 A RMSDrive voltage>7.8V RMS (11.0V peak)Loop impedance0.2 ohm minimum resistance, 1.8 ohm maximum impedanceInput 1Balanced mic or balanced/unbalanced line, +12V phantom (mic only)Input 2Balanced or unbalanced line, expansion portInput 3Isolated 100V line or low impedance mono/stereo speakerMic sensitivity-73 dBu min, -37 dBu maxFrequency response80 Hz to 6.3 kHz (±3 dB)Automatic gain controlSpeech optimised, dynamic range >36 dBMetal loss correction0 to 3 dB per octave, 1 kHz constantMains supply230V, 30W, 45 to 65 Hz, screw terminal connectionDimensions (W x H x D)200 x 200 x 44 mmWeight1.8 kgMountingWall, 4 screwsEnvironmentIP20, -10 to 40°CShow more

from £344.00

1 offer

See all offers