V-TAC

V-TAC Twin Recessed Downlight Frame 2xGU10 Round Aluminium White VT-783RD-WH

Name: V-TAC Twin Recessed Downlight Frame 2xGU10 Round Aluminium White VT-783RD-WH
Brand: V-TAC

The VT-783RD-WH is a twin recessed downlight frame built for two GU10 lamps. The white aluminium plate has a figure-of-eight outline: two round openings joined by a single flange. It measures 173 × 91 mm and is 25 mm deep. The ceiling opening it needs The cut-out measures 155 × 75 mm. The frame overlaps it by roughly 9 mm on every side, so the flange covers the edge of the hole and any rough cutting — the opening does not have to be finished neatly. Four sprung clips, two per opening, hold the frame in the ceiling. Because both lamps share one plate, you cut a single opening instead of making two separate holes for two individual downlights. The lamps it takes Inside are two GU10 lampholders wired straight to the 230 V mains, so no driver or transformer is needed. Lamps are not supplied, which leaves the colour and brightness to you: 2700–3000 K warm white is the usual choice for a living room or bedroom, 4000 K over a kitchen worktop. Two lamps in one plate give two separate beams rather than a single one. That lets you light two neighbouring spots at once, or double the light falling on one part of the room. Aiming and build Each inner ring sits on a movable mount and tilts away from the plane of the ceiling. The two adjust independently, so one fitting can serve two targets — a picture on the wall and the passage beneath it, for instance. The body is aluminium finished in white, which keeps the frame unobtrusive against a light ceiling. V-TAC states an operating range of −25 °C to +50 °C, so the fitting also suits unheated interiors. The manufacturer intends this model for homes and flats as well as hotels, restaurants and commercial interiors.Näytä lisää

alk. 8,12 €

1 tarjous

↑ Paras hinta noussut 23 % viimeisen 30 päivän aikana

Näytä tarjoukset