LUMINES angular connector 90° for LED profiles

Name: LUMINES angular connector 90° for LED profiles
Brand: Lumines

The LUMINES angular connector 90° is a flat L-shaped part — two arms meeting at a right angle, each with two mounting holes. In the LUMINES Lighting accessories catalogue it carries index 14-3030-01. It has no electrical function: it is a mechanical fitting that ties two LED profile sections into a corner.How it joins two profilesThe connector slides into the profile's inner channel, one arm into each of the two sections. Once fastened it stays hidden inside the run, so the finished installation shows the profile corner rather than the fitting.The angle between the arms is fixed at 90°, so the connector covers a right-angled corner only. For turns at other angles LUMINES lists separate 120° and 135° angular connectors in the same range.Which profiles it fitsEach arm is 50 mm long and the part itself is 10.5 mm wide. That means at least 50 mm of straight profile has to remain on each side of the corner for the arm to sit fully inside the channel.The manufacturer specifies it for several dozen LUMINES profile systems — among them W, SILEDA, DILEDA, UNICO, ILEDO, TALIA, LARGO and MONO. The full list of compatible systems is in the product specification; check it against the marking on the profile you already own, because the connector is made for particular families.The profile, the LED strip and the cover are separate products — this listing is the connector alone.Näytä lisää

5,43 €

alk. 4,34 €

1 tarjous

↓ Paras hinta laskenut 20 % viimeisen 30 päivän aikana

Näytä tarjoukset